It will perform well in numerous applications, and the implemented functionality in the minimalist hardware is fully sufficient in many cases. Still, it is a powerful device, not too expensive compared to other UniFi AP models, compact and easy to manage, consistent with the existing UniFi Controller system. It creates then a screen narrowing the radio beam and increasing the radiated power. The characteristics of the built-in antenna do not ensure fully uniform radiation in all directions, and the metal brackets used affect the formation of the radio beam. There is no denying that the Lite version of the access point from the line of UniFi devices shows the weakest performance.
Coverage is average, but expected with this arrangement of devices.
Unifi download speed test software#
We used AirSurvey software to perform a signal map. One of the UAP-AC-LITE access points was placed directly on the ground floor and connected with a cable to a gigabit switch, and the second floor above, establishing a wireless connection with the first AP. We tested the access points in a two-story building with a basement, with thick ceilings and many solid walls. How did the dual-band AC-lite access point from Ubiquiti stand up to the test?
We obtained the following maximum speeds for a single TCP stream: download 894 Mbps, upload 958 Mbps. Before we started WiFi testing, we verified the actual performance of the Gigabit LAN and the iperf3 server.
Unifi download speed test pro#
The test device was a MacBook Pro A1502 equipped with a built-in AirPort Extreme wireless network card - Broadcom BCM4360 3x3, 1.3 Gbps PHY, running on IEEE 802.11a/b/g/n/ac standards, compatible with WiFi 5, and a 10/100/1000 Mbps Gigabit Ethernet card. Speed tests were performed using WiFiPerf software, and the speed test server was iperf3 software.
The goal of the tests was to verify mesh network coverage and available throughput in fixed points of the premises - signal coverage and real speeds. The power supply of the device is 24V, 0.5A, 1 Gigabit Passive PoE adapter, the maximum power consumption is specified at 6.5W. On the bottom it has a physical reset button and a LAN port, as well as a cable entry and locking elements for the mounting kit, making it easy to hang on the wall or ceiling. It's minimalist design fits into any interior. It comes in a white color, with a clearly visible and elegant manufacturer's logo and a blue illuminated circle. Its weight is only 170 grams, or 185 grams with the mounting kit. It is currently the smallest physical solution from UniFi. Physically the access point lite from Ubiquiti has a diameter of 160 mm, height 31.4 mm. Operation is possible in a wide range of relative humidity 5-95 and temperatures -10 to 70 degrees Celsius. The design of the UAP-AC-LITE, characteristic for the Ubiquiti UniFi line of products, allows to match the equipment to almost any interior decor. The manufacturer provides the possibility of mounting the device on the ceiling or wall, thanks to the included accessories. The network device has one RJ-45 LAN port in the Gigabit Ethernet standard, also providing 24V Passive PoE. The Dual-Band 3 dBi three-pole antenna provides a maximum Tx transmit power of 20 dBm, the same for both frequencies. Thanks to the MIMO 2x2 antennas, the maximum throughput is determined at the total level of 1000 Mbps, with theoretical maximum of 300 Mbps in the 2.4 GHz band and 867 Mbps in the 5 GHz band. It is a dual-band device, operating in the IEEE 802.11ac standard, and is, of course, backward compatible with other standards. Ubiquiti Access Point AC-Lite is designed for indoor use.